CVE-2022-50976
📋 TL;DR
This vulnerability allows a local attacker with physical USB access to cause a full device reset by using an invalid reset file. It affects devices that accept password resets via USB. Attackers could disrupt operations by forcing devices to factory defaults.
💻 Affected Systems
- Innomic devices with USB password reset capability
⚠️ Risk & Real-World Impact
Worst Case
Complete device reset to factory defaults, causing data loss, service disruption, and requiring full reconfiguration.
Likely Case
Unauthorized device reset leading to temporary service interruption and administrative overhead for recovery.
If Mitigated
Minimal impact if USB reset functionality is disabled or physical access controls prevent exploitation.
🎯 Exploit Status
Exploitation requires physical USB access and creating/supplying an invalid reset file; no authentication needed once access is obtained.
🛠️ Fix & Mitigation
✅ Official Fix
Patch Version: Check vendor advisory for specific patched versions
Vendor Advisory: https://www.innomic.com/.well-known/csaf/white/2026/ids-2026-0001.html
Restart Required: Yes
Instructions:
1. Review vendor advisory for affected products. 2. Apply firmware/software updates from Innomic. 3. Restart devices after patching. 4. Verify fix using vendor guidance.
🔧 Temporary Workarounds
Disable USB password reset
allTurn off the USB-based password reset functionality if not required.
Check device configuration interface for USB reset settings and disable.
Physical access controls
allRestrict physical access to USB ports using locks, enclosures, or monitoring.
🧯 If You Can't Patch
- Implement strict physical security controls to prevent unauthorized USB access.
- Monitor for unexpected device resets and maintain backups for quick recovery.
🔍 How to Verify
Check if Vulnerable:
Check device configuration for enabled USB password reset feature; consult vendor advisory for specific version checks.
Check Version:
Use device management interface or CLI to check firmware version (vendor-specific command).
Verify Fix Applied:
After patching, attempt to trigger reset with invalid USB file (in controlled test) to confirm failure; verify firmware version matches patched release.
📡 Detection & Monitoring
Log Indicators:
- Log entries indicating password reset attempts via USB
- Unexpected device reboot or factory reset events
Network Indicators:
- N/A - local physical attack
SIEM Query:
Search for 'reset', 'USB', 'password reset' in device logs within short timeframes.